The New Kawasaki ZX-6R Trading in gets easier and easier
download didn’t go to my local Kawasaki shop expecting to trade in the 2004 636 I’d been happily riding. I honestly didn’t expect there to be anything on the floor that would motivate me to bring the...
View ArticleKAWASAKI STX-12F, STX-15F Riva/Vortech Supercharged STX-15F Engine...
download Our race bred Supercharger System for the Kawasaki STX-15F contains all necessary engine components to produce the ultimate 80mph closed course race craft. Kit contains the same specifications...
View ArticleKawasaki KVF 360 Winch Mount Installation Manual
download 1. Remove the bottom and middle bumper mounting bolts. 2. Pull the front bumper outwards while sliding the winch mount behind the bumper with the roller fairlead mount tabs facing downward and...
View Article2002 Kawasaki 360 ATV WINCH ACCESSORY INSTALLATION INSTRUCTIONS
download 1. Remove the two 8mm bolts that attach the front bumper assembly to the ATV frame see figure 3. 2. Place Winch mounting plate (A1) into position and fasten the two bent down tabs to the ATV...
View ArticleKawasaki Prairie 650 Snorkel REMOVAL AND INSTALLATION
download Remove plastic from around air filter housing. Remove air filter housing lid and air filter. Remove 8 small screws from bottom of air box. Next, remove bolt from front and rear of air box....
View ArticleKAWASAKI 400 PRAIRIE ATV WINCH MOUNT INSTALLATION ISTRUCTIONS
download 1. Place the mounting plate into position on the front bumper tube assembly and attach with the four ¼- 20 u-bolts, hex nuts, and lock washers. See the illustration below for detail. 2. Place...
View ArticleKawasaki Exhausts – ZX-6 ZX-10 Zx-14 Exhaust – Slip-ons INSTALLATION MANUAL
download Our favorite exhaust options for Kawasaki ZX Ninjas – ZX-10,ZX-6r, and the new horsepower king, Zx-14.. Grab your horsepower today. We love Rob Muzzy and Muzzy Exhausts.Going back to Doug...
View ArticleKawasaki Ninja 650R (ER-6F) & ER-6N Resource Upgrading the Suspension on the...
download Top fork is as removed. Kawasaki Ninja 650R (ER-6F) & ER-6N Resource Before removing the fork from the clamps on the yokes I loosened the fork top. Before removing the fork top the...
View ArticleKawasaki 650/360 Prairie Lift Kit Installation and removal Instructions
download 1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it is securely supported but so that A-arms and shocks can...
View ArticleKawasaki Prairie 360,650,700 ATV PLOW Plow Mounting Kit INSTALLATION...
download Mount Installation Note: There are different hole locations on the plow mount depending on the bike model. For Prairie 360 use the middle hole locations (B), for Prairie 650 and Twin Peaks 700...
View Article
